FlexiTrans High Temp. Hard Surface has been reformulated to work in MOST color laser printers which work WITHOUT Fuser Oil. This paper is specifically designed to be Self Weeding, ONLY the toner/image transfers, no other coatings.
HTHS can be applied to coated coffee mugs (apply at 325°F for 120 seconds), raw tile (apply at 325°F for 90 seconds), plastics (apply at 275-325°F for 60 seconds), vinyl (apply at 250°F for 50 seconds), magnetic material (apply at 250°F for 60 seconds), wood and most non-porous surfaces. These are just basic instructions which may be adjusted to your product needs.
When applying to CLC Coated tiles and mugs, they must be further cured in an oven for 5-10 minutes at 400°F. For most surfaces, except mugs, use of our special Thermal Pad is necessary for a proper transfer application.
The paper can only be applied with a heat press and must be peeled warm or cold.
|
|
|
FlexiTrans High Temp. Hard Surface has been reformulated to work in MOST color laser printers which work WITH Fuser Oil. This paper is specifically designed to be Self Weeding, ONLY the toner/image transfers, no other coatings.
HTHS can be applied to coated coffee mugs (apply at 325°F for 120 seconds), raw tile (apply at 325°F for 90 seconds), plastics (apply at 275-325°F for 60 seconds), vinyl (apply at 250°F for 50 seconds), magnetic material (apply at 250°F for 60 seconds), wood and most non-porous surfaces. These are just basic instructions which may be adjusted to your product needs.
When applying to CLC Coated tiles and mugs, they must be further cured in an oven for 5-10 minutes at 400°F. For most surfaces, except mugs, use of our special Thermal Pad is necessary for a proper transfer application.
The paper can only be applied with a heat press and must be peeled warm or cold.
|
|